- Seam Cloth 5″ x 16.6′ $19.99
- Tile Subfloor 3’3″ x 32.8′ (108 sq. ft.) / 1m x 10m $71.28
- Seam Cloth 5″ x 98.6′ $83.58
- TEST USA Tile Subfloor 3’3″ x 98.5′ (323 sq. ft.) / 1m x 30m $245.48
Standard Shipping: 3 – 7 Business Days
All shipping times are estimated and may not be 100% accurate. Shipping times may vary based on location and order size. Most orders are shipped within the next business day.
TCNA RATED “EXTRA HEAVY”
SUPERSEAL Tile Subfloor was extensively tested by the Tile Council of North America, and received the highest rating possible: “Extra Heavy.” This means you can rest peacefully knowing that the best product on the market protects your residential or commercial application.
NO STOPPING OR WAITING
SUPERSEAL Tile Subfloor and the tiles can be installed in a continuous non-stop installation from beginning to end.
CERAMICS CAN NOW USE MODIFIED THINSET
The unique characteristics of SUPERSEAL Tile Subfloor allows modified thinsets to be used with porcelain and ceramic tiles.
FASTER CURING TIMES
The membranes special fleece layers enhance the curing process. It increases tile adhesion by up to 5 times sooner, allowing for grouting of the tiles easier.
TIME IS MONEY
The membrane’s unique surface also allows for pencil marks and chalk lines to stay permanent during the layout procedure. This is a huge advantage, especially when time is money.
SUPER STRENGTH – CRACK ISOLATION
Thousands of dimpled concrete pillars isolate the tiles from potential floor base cracks. The membrane’s unique hydrating process allows the thinset to maximize the bond within the tile floor assembly.
COMPATIBLE WITH HEAT MATS
The preferred and most common installation of heat mats is directly on the substrate; however, you can also install heat mats on top of SUPERSEAL Tile Subfloor.
Press in tile subfloor
I have linoleum or VCT in my kitchen, but would like to put tile. Do I need to remove the linoleum in area where it is not fully bonded?
Check for blisters or delaminated in the main body and remove. Rent a floor sander and scarify the surface to allow good bonding of the thinset. Use fast-set thinset mixed to a more liquid consistency so that the tile subfloor when installed is completely contact the entire surface.
Can I apply SUPERSEAL over existing tiles?
Yes, providing the tiles are clean and free of silicone and waxes. Ensure they are well bonded to the substrate and sanded with a rotary floor sander with extra course sanding disk to improve adhesion. Use fast-set thinset mixed to a more liquid consistency so that the tile subfloor when installed is completely contact the entire surface.