ALL-IN-ONE SUBFLOOR

The Ultimate Flooring Protection For Your Home

SUPERSEAL All-In-One Subfloor is an advanced flooring underlayment. Its unique double dimple design creates airflow channels on both the top and bottom allowing your flooring to breathe. This prevents moisture from becoming trapped against your floor, protecting it from mold, mildew, and damage. SUPERSEAL All-In-One can be installed directly under laminate, engineered wood, or carpet with no plywood required. For carpet installations, tack strips can be nailed directly through the membrane without affecting its amazing performance.

Whether you're renovating a basement, finishing a concrete floor, or installing carpet, SUPERSEAL All-In-One Subfloor delivers a durable and breathable solution that keeps your floors safe for now and for years to come.

  • Laminate Subfloor on All-In-One
1 1

Benefits

Benefits

  • Double Dimple design creates airflow above and below
  • Prevents trapped moisture and mold and mildew growth
  • Quick and easy to install
  • No plywood required
  • 15,600 psf compressive strength
  • Tack strips can be nailed onto membrane for carpet installations

VOC's

SUPERSEAL All-In-One Subfloor emits negligible to no VOC's. Why? it's made from tough, long lasting HDPE (High Density Polyethylene)

HDPE is one of the safest and cleanest plastics, especially for indoor use.

Why Double Dimpled Protection is Important

All-In-One Subfloor is made from tough long lasting plastic (HDPE)

The one of a kind double dimple design outperforms anything else on the market today.

Double Dimple Design:

All-In-One Subfloor features 2 air gaps, one above and below the HDPE core. These air gaps allow your floor to breath.

Why is this important?

Moisture vapor or even water can sometimes come through the concrete substrate. Having an air gap there, especially a tough plastic one, naturally allows the moisture to evaporate instead of being trapped directly against your underlay or carpet pad. Trapped moisture can lead to mild and mildew growth, health issues, and damaging you rfloor. Lifting the entire flooring assembly off the concrete subfloor is a huge benefit.

However, In other products the protection stops there. All-In-One Subfloor takes it to the next level.

The Next Level

The air gap above All-In-One Subfloor adds that next level protection.The 2nd airgap allows your flooring to breath as well giving you rfloor that double layer of protection.

In addition, because of the 2 air gaps, it also creates a thermal break against the cold concrete.

SUPERSEAL All-In-One Subfloor provides peace of mind knowing that floor and your home has the ultimate, and unmatched protection on the market today.

Areas of Use

Under:

  • Laminate flooring,
  • Engineered wood or plywood
  • Carpet flooring
  • Click together vinyl plank flooring.

All-In-One Subfloor Installation

Installing All-In-One on the concrete subfloor.

  • Unroll it the membrane
  • Cut to fit leaving a 1/4" (6mm) at all wall edges and pillars.
  • Flip the membrane over and allow it to acclimatize to the room. This will help relax the membrane and reduce the curl from being rolled up.
  • Do not overlap the membrane.
  • Tape the seams together.

Additional Notes

  • Ensure your floor is level prior to installation
  • Repair all bumps and divots
  • Do NOT install under load bearing walls.

Laminate Installations

  • Install a foam layer on top of the All-In-One Subfloor. Even the most basic will do.
  • Proceed with the installation of the laminate or engineered locking floor as per the manufacturers instructions.
  • Flooring with foam attached can be installed directly on the membrane.

Carpet Installations

  • Nail the tack strip through the membrane. Once fastened to the concrete subfloor, install your carpet pad and carpet as per the manufacturers instructions.
  • When installing the tack strip you may require extra nails
  • You can also install the tack strip onto the concrete subfloor and install All-In-One Subfloor up to the tack strip.
$173.01 CAD
$173.01 CAD
Sale Sold out
Shipping calculated at checkout.
Roll Size
View full details

Gallery

Carpet Installation with SUPERSEAL
Carpet Install (2).jpeg
Carpet Installation with SUPERSEAL
Carpet Install (1).jpeg
Carpet Installation with SUPERSEAL
Carpet Install (2).JPG
Carpet Installation with SUPERSEAL
Carpet Install (3).jpeg
Carpet Installation with SUPERSEAL
Carpet Install (1).JPG
Concrete Subfloor getting ready for flooring

Concrete Subfloors - Questions & Answers

Flooring 101 - Concrete Subfloors

Preparing a concrete subfloor is before installing your flooring is a priority to having a flat, dry, and stable surface. Without proper preparation, moisture, unevenness, or cracks can lead to mold and mildew growth and permanent damage to you floor. This can lead to costly repairs or even the need to replace your entire floor.

Concrete Subfloor FAQ
All-In-One Subfloor installed under laminate

Laminate Over Concrete - Questions & Answers

Flooring 101 - Laminate Floors

Laminate a popular because it looks good, is easy to install, and easy to keep clean. They are considered a floating floor because the laminate is not glued or nailed down but is installed on top of an underlay.

When installing a laminate floor there can be a lot of questions about the best way to install it, how to protect it, or what do you need. Here are some straightforward answers to the most common questions to help install it the right way, the first time.

  • Do I need a moisture barrier?
  • Can I install directly on concrete?
  • What’s the best underlayment?
  • How do I prevent mold and mildew?
  • How do I avoid costly repairs?
Laminate Flooring FAQ