ROLLER GRADE WATERPROOFING
02d Waterproofing Roller Grade
Typical Foundation Installation
Tools Required
- Tape Measure
- Roller / Brush
- Protective equipment
Calculating Material Coverage
Numbers are approximate based on application.
One 5g pail can cover approximately;
- 150ft² at 40 mils thick (30ft² per gallon)
- 100ft² at 60 mils thick (20ft² per gallon)
- Quantity can vary based on application.
Preparing the Foundation
- Clean the footing and wall of loose debris or standing water
- Mark the grade height of the areas to be waterproofed.
- Patch all tie holes, pour lines, or honeycombing with SUPERSEAL Mastic.
Installation
Using ½" (15mm) roller;
- Apply a thick first coat to all areas to be protected.
- Allow coating to dry to the touch
- Apply a 2nd or 3rd coat to achieve the desired thickness
- Allow to cure for 24 hours
Install a Drainage Membrane or Protection board if required